KAMINSKI, P.C.
Um
Sistema de Diagnóstico de Falhas Estruturais baseado em Redes Neurais
Artificiais e Freqüências Naturais.
A
System of Diagnosis of Structural Damage based on Artificial Neural
Nets and Natural Frequencies. Escola Politécnica da
Universidade de São Paulo.
1997.
Doctorate Dissertation
KAMINSKI, P.C. Análise Dinâmica de Estruturas Modificadas.Dynamic Analysis of Modified Structures.
Escola Politécnica da Universidade de
São Paulo. 1992.
Masters Degree Thesis
KAMINSKI, P.C.
Considerações sobre a Análise Dinâmica de Mecanismos Elásticos e o
Estudo de um Modelo baseado no Método dos Elementos Finitos.
Considerations on the Dynamic Analysis of Elastic Mechanisms and the
Study of a Model Based on the Finite Element Method. Escola Politécnica da
Universidade de São Paulo.
1989.
Books, Book Chapters and Lecture Notes
 
SUITI, A.P.; VIZIOLI, R.; KAMINSKI, P.C.
Sinergia entre as ferramentas de criatividade utilizadas nas etapas
iniciais do processo de desenvolvimento de produtos. In:
TULLIO, F.B.M.; TULLIO, L.
Gestão de projetos sustentáveis
Ponta Grossa (PR): Atena Editora, v. 1,
p. 219-229. ISBN 978-85-85107-71-0. 2018.
KAMINSKI, P.C.; NETTO, M.L. Die initiative "Global Engineering
Excellence" (GEE) und das internationale Praktikumsprogramm (GEIP). In:
MAYER, B.N., OLSINGER, T. Handbuch Deutsch - Brasilianischer
Technologieaustausch 2009. p. 275-278. ISBN 978-85-85577-37-7. 2009.
KAMINSKI, P.C.; FERREIRA, E.P.F. Periodic evaluation of continuing
education programs based on the use of QFD: an analysis of the
effectiveness. In: AUNG, W. et al. Innovations 2008 - World Innovations
in Engineering Education and Research. p. 579-592. iNEER. ISBN
978-0-9741252-8-2. 2008.
OLIVEIRA, A.C.;
KAMINSKI, P.C. Desenvolvimento de Produtos e Inovação Tecnológica em
Pequenas e Médias Empresas do Estado de São Paulo.
Development of Products and Technological Innovation in Small and
Medium Companies of the State of São Paulo. Fundação de Apoio à
Tecnologia - FAT. 2005.
KAMINSKI, P.C.
Mecânica Geral para Engenheiros.
General Mechanics for Engineers. Edgard Blücher.
2001. (Abstract).
KAMINSKI, P.C. Desenvolvendo Produtos com planejamento, Criatividade
e Qualidade.
Developing Products with Planning, Creativity and Quality. Livros Técnicos e
Científicos SA. 2000.
KAMINSKI, P.C. Projeto de Submarinos.
Design of Submarines. AMRJ/ETCN - 1st edition (Translation of chapters
I to VIII of the book "U-bootbau" by Ulrich Gabler). 1991.
Papers published in International Journals
 
CANDIDO, G. M.; KAMINSKI, P. C.;
Civilian armored vehicle operations in Brazil – challenges and production processes
improvements: a qualitative survey
Production Engineering Archives, vol.29, no.2, 2023, pp.128-139.
https://doi.org/10.30657/pea.2023.29.15
.
MEDEIROS, M. A.; CANDIDO, G. M.; KAMINSKI, P. C.; ARAÚJO, A. G. L.;
Design for Excellence (DfX) in vehicle armoring operations: improvements and speed
up a systematic literature review.
Product: Management and Development, v. 20, ed. 1.
http://dx.doi.org/10.4322/pmd.2022.017
.
BARALDI, E. C.; KAMINSKI, P. C.; A review of the study on the causes of recall in automotive
vehicles marketed in Brazil. SAE Technical Paper Series, n. 2021-36-008, 2021.
https://doi.org/10.4271/2021-36-0008
.
ISSN 0148-7191.
GRUBER, G. E.; KAMINSKI, P. C.; BARALDI, E. C. A comparison of motor vehicle recalls between
Brazil and Germany: different approaches and results. Product: Management & Development (PMD), 2021.
http://dx.doi.org/10.4322/pmd.2020.035
.
ISSN 2237-5228.
MAIONE, B.; KAMINSKI, P.C.; BARALDI, E.C. The different legislation of automotive recall and their implications for society. SAE Technical Papers, v. 36, p. 1-12, 2021. (Abstract)
MEDEIROS, M. A.; CANDIDO, G. M.; KAMINSKI, P. C.; ARAÚJO, A. G. L.; The different legislation of automotive recall and their implications for society. SAE Technical Papers, v. 36, p. 1-12, 2021. (Abstract)
MAIONE, B.; KAMINSKI, P.C.; BARALDI, E.C. The different legislation of automotive recall and their implications for society. SAE Technical Papers, v. 36, p. 1-12, 2021. (Abstract)
CANDIDO, G.; KAMINSKI, P.C. The addition of design for armoring as an engineering methodology in the development of premium civilian vehicles. SAE Technical Papers, v. 36, p. 1-9, 2021. (Abstract)
OCAMPO, J.U.; KAMINSKI, P.C. Medical device development, from technical design to integrated product development. Journal of Medical Engineering & Technology, v. 43, p. 287-304, 2019.(Abstract)
CANDIDO, G.M.; KAMINSKI, P.C. Basic technical requirements for ballistic safety to guarantee the quality of civilian automotive armoring services in Brazil. SAE Technical Papers, v. 36, p. 1-9, 2019.(Abstract)
ARMELLINI, F.; BOUCHARD, A.; KAMINSKI, P.C.; MARIN, R. Open innovation practices in the automotive industry: an exploratory comparison between Brazil and France. SAE Technical Paper Series, v. 36, p. 1-9, 2018.(Abstract)
BARALDI, E.C.; KAMINSKI, P.C. A study on the causes of recall in
automotive vehicles marketed in Brazil. SAE Technical Paper Series, v. 36,
p. 1-6, 2016. (Abstract).
SILVA, G.C.; KAMINSKI, P.C. From embedded systems (ES) to cyber-physical systems (CPS): an
analysis of transitory stage of automotive manufacturing in the
Industrie 4.0 scenario. SAE Technical Paper Series, p. 1-1, 2016. (Abstract).
SILVA, G.C.; KAMINSKI, P.C. Selection of virtual and physical prototypes in the
product development process. International Journal of Advanced Manufacturing
Technology (Internet), v. 1, p. 1-18, 2015.
(Abstract).
SILVA, G.C.; KAMINSKI, P.C.
Application of digital factory concepts to optimise and integrate inventories
in automotive pre-assembly areas. International Journal of Computer
Integrated Manufacturing, v. 1, p. 1-9, 2014. (Abstract).
SILVA, G.C.; KAMINSKI, P.C.; GRUBER, G.E. Usage of
Digital Factory in the analysis of automotive production scenarios: available
software and resources. SAE Technical Paper Series, v. 36, p. 1-6,
2014. (Abstract).
BARALDI, E.C.; KAMINSKI, P.C. Product and process development using the lean
thinking principles in an Automotive Industry. SAE Technical Paper Series,
v. 36, p. 1-13, 2014. (Abstract).
OLIVEIRA, A.C.; KAMINSKI, P.C.
A reference model to determine the degree of maturity in the product
development process of industrial SMEs. Technovation, v. 32, p.
671-680, 2012. (Abstract).
ARMELLINI, F.; KAMINSKI, P.C.;
BEAUDRY, C. Integrating open innovation to new product development -
the case of the Brazilian aerospace industry. International Journal of
Technological Learning, Innovation and Development, v. 5, p.
367-384, 2012. (Abstract).
SILVA, G.C.; KAMINSKI, P.C.
Proposal of technical interface among product engineering,
manufacturing engineering and production engineering, as an aid to
automotive product development process. SAE Technical Paper Series, p. 2012-36-0577, 2012. (Abstract).
PERROTTA,
P.D.; SILVA, G.C.;
KAMINSKI, P.C. Implementation of ABS system on an existing heavy trucks
line-up in accordance to Brazilian Resolution No. 312/09 (CONTRAN). SAE
Technical Paper Series, v. 2012, p. 2012-36-0466, 2012. (Abstract).
BORDIGNON, F.; KAMINSKI, P.C.; TIMELLINI, G. Guidelines for the
Brazilian ceramic sector strategic development, based on a comparison
with the Italian market. CFI. Ceramic Forum International, v. 89, p.
44-52, 2012.
IBUSUKI,
U.; KOBAYASHI, H.; KAMINSKI, P.C. Localisation
of product development based on competitive advantage of location and
government policies: a case study of car makers in Brazil.
International Journal of Automotive Technology and Management, v. 12,
p. 172, 2012. (Abstract).
KAMINSKI,
P.C.; SILVA, G.C. Obtention of prototype parts by vacuum bagging for
the development of special packages for internal use by automakers.
International Journal of Rapid Manufacturing, v.2, p.132-149, 2011. (Abstract).
BARALDI, E.C.;
KAMINSKI, P.C. Ergonomic planned supply in an automotive assembly line.
Human Factors and Ergonomics in Manufacturing & Service Industries, v. 21, p. 104-119. Brazil, 2011. (Abstract).
KAMINSKI,
P.C. An evaluation of the auto parts sector in Brazil in the 21st
century. Journal of Waseda University - Research Institute of Japanese
Auto Parts Industries, v. 5, p. 63-69. Japão, 2010.
FERNANDES,
M.A.B.; KAMINSK, P.C. Computational simulation applied to planning and
project of the body shop area in the automotive industry. SAE TECHNICAL
PAPERS SERIES 2010-36-0120, 2010. (Abstract).
GUIGUER FILHO, D.; KAMINSKI, P.C. Co-design - from an automaker
perspective. International Journal of Product Development, v. 8, n. 3,
p. 333-353. Suiça, 2009. (Abstract).
CANDIDO, G.M.; KAMINSKI, P.C. Product value optimisation engineering
applied to current component designs: a case study from the Brazilian
automotive industry. International Journal of Automotive Technology
and Management, v. 8, n. 3, p. 270-296. Inglaterra, 2008.
(Abstract).
KAMINSKI, P.C.; OLIVEIRA, A.C.; LOPES, T.M. Knowledge transfer in
product development processes: A case study in small and medium
enterprises (SMEs) of the metal-mechanic sector from São Paulo, Brazil.
Technovation, v. 28, p. 29-36. 2008.
(Abstract).
BARALDI,
E.C.; KAMINSKI, P.C. Using the production preparation process as an
advanced lean enterprise methods tool. SAE
TECHNICAL PAPER SERIES 2008-36-0057, 2008. (Abstract).
SILVA, G. C. ; KAMINSKI, P. C. . Rapid prototyping applied to parts used in
static tests of racks for packing and transporting automobile parts. SAE
Technical Paper Series, v. 1, p. 2007-01-2690, 2007. (Abstract).
IBUSUKI, U.; KAMINSKI, P.C. Product development process
with focus on value engineering and target-costing: a case study in an
automotive company. International Journal of Production Economics,
v. 105, p. 459-474. 2007.
(Abstract).
FERREIRA, C.S.; KAMINSKI, P.C.
Global vehicle architectures development
in the automotive industry. SAE TECHNICAL PAPER SERIES 2007-01-2575,
2007. (Abstract).
SILVA, G.C.; KAMINSKI, P.C.
Rapid prototyping applied to parts used in static
rehearsals of racks for packing and transporting of the automobiles
parts. SAE TECHNICAL PAPERS SERIES 2007-01-2690, 2007.
(Abstract).
MACARRÃO JÚNIOR, L.; KAMINSKI, P.C.
Vacuum forming process: parts fabricated
with simplicity. SAE TECHNICAL PAPERS SERIES 2007-01-2705, 2007.
(Abstract).
NETTO,
A.C.; KAMINSKI, P.C.
The voice of the Product Designer: a contribution to effectiveness
evaluation in the automotive industry. Journal
of Quality, n. 121. Inglaterra, 2006.
LIVIERO,
F.; KAMINSKI,
P.C.Managing
communication channels on transnational projects. SAE TECHNICAL PAPERS SERIES2006-01-2534, 2006. (Abstract).
GARCIA,
F.; KAMINSKI,
P.C.Remote
maintenance unit for heavy-duty vehicles segment. SAE TECHNICAL PAPERS SERIES2006-01-2536, 2006. (Abstract).
MACARRÃO
JÚNIOR, L.; KAMINSKI, P.C.Vaccum
bagging: fiberglass parts lamination with quality. SAE TECHNICAL PAPERS SERIES2006-01-2609, 2006.
(Abstract).
KAMINSKI, P.C.;
CANDIDO, G.M. Current automotive components optimization - case studies.SAE TECHNICAL PAPERS SERIES 2005-01-4045, 2005. (Abstract).
MACARRÃO
JÚNIOR, L.; BRAGA, J.F.G.F.; KAMINSKI, P.C. How to Achieve
Faster, Cheaper and High Quality Parts by RTV Silicone Rubber Process. SAE TECHNICAL PAPERS SERIES 2005-01-4095, 2005. (Abstract).
KAMINSKI, P.C.;
FERREIRA, E.P.F.; THEUER, S.L.H. Evaluating and improving the quality
of an engineering specialization program through the QFD Methodology.
International Journal of Engineering Education, v. 20, n. 6, p.
1034-1041. Inglaterra, 2004.
KAMINSKI, P.C.; ALVES, M.A.L.
An alternative model for analysis of the
instability of the stiffeners in the process of manufacturing
reinforced PVC pipes.
Engineering Structures, v. 26, n. 9, p. 1311-1318. Estados Unidos, 2004.
(Abstract).
FIORAVANTI,
A.; KAMINSKI, P.C. Design for Six Sigma (DFSS): Uma Análise Técnica e
Econômica de sua Aplicação no Processo de Desenvolvimento de Veículos.
SAE TECHNICAL PAPERS SERIES 2004-01-3308, 2004.
(Abstract).
KAMINSKI, P.C.; CAPUANO, M.N.
Micro hole machining by conventional penetration electrical discharge
machine. International Journal of Machine
Tools and Manufacture, v. 43, p. 1143-1149. Inglaterra, 2003.
(Abstract).
KAMINSKI, P.C.;
LATERZA, L.B.M.
Buckling analysis of PVC sheets. Journal of the
Brazilian Society of Mechanical Engineering, v.XXII, n. 4, p. 513-522. Brasil, 2000.
KAMINSKI, P.C. The approximate location of damage through the analysis
of natural frequencies with artificial neural works.
Part E Journal Of The Process Mechanical
Engineering - IMechE, v. 209, p. 117-123. 1995.
(Abstract).
BORDIGNON, F.; KAMINSKI, P.C. Planta piloto no coloríficio cerâmico.
Cerâmica Informação, v. 45, p. 43-48, Rio Claro, 2006.
KAMINSKI, P.C.; OLIVEIRA, A.C. Como as pequenas e médias empresas
paulistas usam os recursos computadorizados no desenvolvimento de
produtos. Máquinas e Metais. Editora Aranda, v. XLI, n. 471, p. 264-279, 2005.
KAMINSKI, P.C.; OLIVEIRA, J.H.S.A.
Prototipagem Rápida Aumentando a Produtividade. Revista OESP Metal
Mecânica, v. 4, n. 26, p. 40-45, 1999.
KAMINSKI, P.C.; CAPUANO, M.N.
Usinagem de Microfuros pelo Processo de Eletro-Erosão por Penetração.
Revista OESP Metal Mecânica, v. 4, n. 25, p. 42-47, 1999.
KAMINSKI, P.C. Otimização
Estrutural de Prensas Excêntricas em ‘C’. Revista Máquinas e
Metais, v. 388, p. 90-99, 1998.
KAMINSKI, P.C. Aplicação de
Programas de Análise Estrutural Linear Elástica A Problemas de Condução
de Calor e Escoamento Potencial de Fluidos Perfeitos - Aspectos Teóricos
e Exemplos. Revista Brasileira de Engenharia, Caderno de Engenharia
Naval, v. 6, n. 1, p. 85-97, 1990.
Papers Published in International Proceedings
 
BARALDI, E.C.; KAMINSKI, P.C. The recall and how the lessons learned can be used. Proceedings of the 27th International Colloquium of Gerpisa. Paris, 2019. (Abstract).
VIZIOLI, R.; KAMINSKI, P.C. Improving information flow in the product development process by using divergence and convergence: a classroom practice. 13th International Conference on Design Principles & Practices. St. Petersburg, 2019.
CASSOLI, B.B.; ARMELLINI, F.; KAMINSKI, P.C. Adapting open business models in
emergent economies: aerospace Brazilian case. Proceedings of the ISPIM Innovation
Forum. Boston, 2016.
OCAMPO, J.U.; KAMINSKI, P.C.
Gestão do conhecimento no âmbito do desenvolvimento de produtos nas PMEs.
Proceedings of the IV Congreso Internacional de Gestión Tecnológica e Innovación.
Cartagena de Indias, 2014.
ARMELLINI, F.; BEAUDRY, C.; KAMINSKI, P.C.
Comparative analysis of public policies for innovation in the aerospace
industries in Brazil and Canada. Proceedings of the International Congress of
Management of Technology - IAMOT. Porto Alegre, 2013.
OCAMPO, J.U.; KAMINSKI, P.C.
An initial proposal for pdp of SMEs developing hospital furniture.
Proceedings of the International Congress of Mechanical
Engineering - COBEM. Rio de Janeiro, 2013.
ARMELLINI, F.; KAMINSKI, P.C.; BEAUDRY, C.
Ideas, knowledge and technology - a product development framework for open
innovation. Proceedings of the XXI Brazilian Congress of Mechanical Engineering.
Natal, 2011.
CANDIDO, G.M.; KAMINSKI, P.C.
Ecodesign applied on new product development in automotive design. Proceedings
of the XXI Brazilian Congress of Mechanical Engineering. Natal, 2011.
NETTO, A.C.; KAMINSKI, P.C. The quality of product design and
development from the designer's point of view: the case of a major
automotive manufacturer. Proceedings of UNINDU 2007 - 2nd
International Congress University-Industry Cooperation, Perugia, 2007.
FERREIRA, E.P.F.; KAMINSKI, P.C. Analysis of potential in adding
services in low differentiation products. Proceedings of the 19th
International Conference on Production Research - Valparaíso,
2007.
NETTO, A.C.; KAMINSKI, P.C. Assessing the quality of product design
from the designer's point of view: the case of a global automotive
supplier. Proceedings of the International Congress of Mechanical
Engineering - COBEM. Brasília, 2007.
BORDIGNON, F.; KAMINSKI, P.C. Qualitative analysis of consequences of
the use of different methodologies for single-firing production.
Proceedings of the International Congress of Mechanical Engineering -
COBEM. Brasília, 2007.
VIDAL, O.;
KAMINSKI, P.C. An
example of applying Digital Factory Concept for body shop design in
the brazilian automotive industry. Proceedings of the International
PACE Forum Digital Manufacturing. Darmstadt, 2005.
KAMINSKI, P.C.; FERREIRA, E.P.F. Periodic Evaluation System for
Continued Education Programs in Engineering. Proceedings of the
International Conference on Engineering Education - ICEE. Gliwice,
2005.
NETTO, A.C.; KAMINSKI, P.C. Assessing the Quality of Product Design
from the Designer´s Point of View.
Proceedings of the XVIII International Congress of
Mechanical Engineering - COBEM. Ouro Preto, 2005.
BORDIGNON, F.; KAMINSKI, P.C. Technical and Economic Evaluation of an
Installation Project of a Pilot Plant in the Technical Assistance
Laboratory of a Ceramic Glaze Producer. Proceedings
of the XVIII International Congress of Mechanical
Engineering - COBEM.
Ouro Preto, 2005.
KAMINSKI, P.C.; MASSARANI, M. Design Methodology Courses in the
Mechanical Engineering Department of Escola Politécnica - USP.
Proceedings of the International Conference on Engineering Education.
Gainesville, 2004.
ALVES, M.A.L.; KAMINSKI, P.C. A
Design Tool for Reinforced Non-pressurized Pipes. Proceedings of the
XVII International Congress of Mechanical Engineering - COBEM. São
Paulo, 2003.
BARROCO, M.S.; KAMINSKI, P.C. A
Proposal for a Product Engineering Quality Plan inside the Automotive
Industry. Proceedings of the XVII International Congress of Mechanical
Engineering - COBEM. São Paulo, 2003.
KAMINSKI, P.C.; ALVES, M.A.L.
Desenvolvimento de uma Ferramenta para Projeto de Tubos de PVC
Estruturados. Proceedings of the VI Congresso Íbero Americano de
Engenharia Mecânica - CIBEM. Coimbra, 2003.
ALVES, M.A.L.; KAMINSKI, P.C. A
Comparative Study on the Use of Different Types of Artificial Neural
Networks For Identification and Determination of Damages. Proceedings
of the XVI Brazilian Congress of Mechanical Engineering - COBEM. Uberlândia,
2001.
KAMINSKI, P.C.; ALVES, M.A.L.
Buckling Analysis of Ribbed Plates for Use in Pipes. Proceedings of
the XVI Brazilian Congress of Mechanical Engineering - COBEM. Uberlândia,
2001.
KAMINSKI, P.C.; LATERZA, L.B.M.
Fatigue Failure Analysis in u PVC Tee Fittings. Proceedings of the XVI
Brazilian Congress of Mechanical Engineering - COBEM. Uberlândia,
2001.
KAMINSKI, P.C. A Non-Destructive
Testing System Based on the Use of Artificial Neural Networks and
Natural Frequencies. Proceedings of the International Symposium on
Dynamic Problems in Mechanics and Mechatronics - Euro DINAME. Günzburg, 1999.
KAMINSKI, P.C.; CAPUANO, M.N.
Machining of Micro Holes by the Process of Electroerosion by
Penetration: an Introductory Study. Proceedings of the VI Pan-American
Congress of Applied Mechanics and Eighth International Conference on
Dynamic Problems in Mechanics. Rio de Janeiro, 1999.
ALVES, M.A.L.; KAMINSKI, P.C. Damage
Detection In Structures Using Natural Frequencies And Neural Networks.
Proceedings of the XII Engineering Mechanics Conference. La Jolla, 1998.
KAMINSKI, P.C.; MOURA, R.M.
Localization of cracks in structures using neural networks and natural
frequencies. Proceedings of the V Pan American Congress of Applied
Mechanics - PACAM. San Juan, Puerto Rico, 1997. (Abstract).
KAMINSKI, P.C. Localization of
cracks using neural networks and natural frequencies. Proceedings of
the VII International Conference on Dynamic Problems in Mechanics -
DINAME. Angra dos Reis, 1997.
KAMINSKI, P.C.; MAGALHÃES, F.S.
Utilização de redes neurais artificiais e freqüências naturais
para a detecção de múltiplos defeitos. Proceedings of the XVI
Congresso Íbero Latino Americano sobre Métodos Computacionais para a
Engenharia – CILAMCE. Curitiba, 1995.
KAMINSKI, P.C.; ALVES, M.A.L. Damage
Detection in Structures Through the Analysis of Natural Frequencies
using Artificial Neural Networks. Proceedings of the VI International
Conference on Dynamic Problems in Mechanics - DINAME. Caxambu, 1995.
KAMINSKI, P.C. Use of artificial
neural networks and natural frequencies to non-destructive testing. An
introductory study. Proceedings of the European Conference on
Artificial Neural Networks. Sorrento, 1994.
(Abstract).
KAMINSKI, P.C. Determination of
eigenvalues of modified structures using the first order perturbation
method and the Rayleigh's quotient - a comparative study. Proceedings
of XI International Modal Analysis Conference and EXPO – IMAC.
Orlando, 1993.
KAMINSKI, P.C.; SALVAGNI, R.B.
Determination of Dynamic Response Sensibility of Modified Structures.
Proceedings of III Pan American Congress of Applied Mechanics - PACAM.
São Paulo, 1993.
KAMINSKI, P.C.; SALVAGNI, R.B.
Determinação da resposta forçada em freqüência de estruturas
modificadas. Proceedings of the XIII Congresso Íbero Latino Americano
sobre Métodos Computacionais para a Engenharia – CILAMCE. Porto
Alegre, 1992.
KAMINSKI, P.C. User Interface and
CAD/CAE Systems. Proceedings of the First International Conference on
Computational Graphics and Visualization Techniques – COMPUGRAPHICS.
Lisboa, 1991.